Welding equipment SET MIG MAG welding helmet flux cored wire Accessories | MIG 145A

SKU: M2145B1
GTIN: 4251210407189
Category: MIG MAG
Brands: VECTOR WELDING

Welding equipment SET MIG MAG welding helmet flux cored wire Accessories | MIG 145A

VECTOR WELDING MIG/MAG welding device MIG 145A

MIG/MAG 30-145A

MMA/electrode 10-140A

IGBT

suitable: wire roll 1kg (D100)

COMPLETE SET: welding device, welding helmet, 1kg flux cored wire and accessories

200,84 €

excl. 19% VAT , plus (Standard)

Low stock level
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Article number: M2145B1

WELDING EQUIPMENT MIG 145A

The light MIG 145A from Vector Welding is a MIG/MAG welding equipment with 30-145A in MIG/MAG mode, 30-140A in MMA mode, as well as 10-140A in TIG mode (optional).

The lightThe MIG/MAG welding process with its automatic wire feed is suitable for many welding applications, even for work in hard-to-reach areas.

This set is a full equipment consisting of MIG MAG welding device MIG 145A, welding helmet, 1kg welding wire (wire roll), as well as an extensive accessory set (see scope of delivery)

MIG 145A PROPERTIES & ADVANTAGES:

MIG/MAG: welding with automatic wire feed. In MIG welding argon (more rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as shielding gas and is mainly used for simple and low-alloy steel such as mild steel
Einstellungen nach Drahtstärke:Stellt man die Drahtstärke (0,6 | 0,8 | 1) ein, so erscheint eine voreingestellte, auf die gewählte Drahtstärke abgestimmte Stromstärke (A) und Drahtvorschubsgeschwindigkeit. Die Amperezahl lässt sich im angegeben Rahmen verändern. Hierbei sind Ampere an Volt gekoppelt, die Geschwindigkeit des Drahtvorschubs lässt sich seperat einstellen.
Im SPL Modus (Separated Parameter Level) können Ampere, Volt und die Geschwindigkeit des Drahtvorschubs unabhängig von einander eingestellt werden. Ein großer Vorteil, wenn eine individuelle Einstellung gewünscht wird. br>
inductance: The unit has a continuously adjustable choke. This smoothes the welding current and changes the rate of current rise, the welding current is reduced or increased, the welding current is increased or decreasedso that the weld seam quality and precision is improved.
MMA/STICK/E-HAND: coated electrodes are used - in this process, the electrodes are the arc carrier and filler metal in one.
hot start: every time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc.
Arc Force: Melted material is transferred to the workpiece more easilyArc, if this material causes contact between the electrode and the molten pool.
Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.
DC-TIG welding (optional: only possible with additional hose package and cables): Welding of almost all metals

Lift Arc: Ignition occurs on contact with the workpiece, then the torch can be lifted andand welding process starts with the selected parameters.span>
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
overheating protection

MIG 145A FEATURES:

Mig Mag Schweißssgeraet Mig 145a Funktionen

MIG 145A TECHNICAL DETAILS:

setting range welding current (MIG/MAG mode)	30 - 145 A
setting range welding current (MMA/STICK mode)	30 - 140 A
(MMA/STICK mode)	30 - 140 A
Adjustment range welding current (TIG mode)	10 - 140 A
Duty cycle (ED) MIG/MAG 40°C	145 A at 21 V 60%
Duty cycle (ED) MMA/STICK 40°C	140 A at 25.6V 60%
Duty cycle (ED) TIG 40°C	140 A at 15.6V 60%
Mains voltage	1 x 230 Volt
Mains frequency	50 - 60 Hz
Protection class	IP23
Dimensions in mm (L x W x H)	290 x 125 x 250
Weight in kg	5.5
Standards	EN60974-1 / IEC60974-1

Shipping weight:	11,02 kg
Item weight:	8,37 kg

MIG 145A TECHNICAL DETAILS:

setting range welding current (MIG/MAG mode)	30 - 145 A
setting range welding current (MMA/STICK mode)	30 - 140 A
setting range welding current (TIG mode)	10 - 140 A
duty cycle (ED) MIG/MAG 40°C	145 A at 21 V 60%
duty cycle (ED) MMA/STICK 40°C	140 A at 25, 6V 60%
duty cycle (ED) TIG 40°C	140 A at 15, 6V 60%
mains voltage	1 x 230 Volt
mains frequency	50 - 60 Hz
protection class	IP23
Dimensions in mm (L x W x H)	290 x 125 x 250
weight in kg	5, 5
standards	EN60974-1 / IEC60974-1