MIG/MAG welding equipment SET welding helmet, accessories | Milano 2300

SKU: M1057SWIM1
GTIN: 4251210407271
Category: MIG MAG
Brands: VECTOR WELDING

MIG/MAG welding equipment SET welding helmet, accessories | Milano 2300

VECTOR WELDING MIG/MAG welding device Milano 2300

MIG/MAG 10-200A

2 cycle/4 cycle

MMA/electrode 10-170A

IGBT inverter

jobstorage

suitable: wire roll 5kg (D200)

COMPLETE SET: welding device, welding helmet, 5kg wire roll, accessories

578,99 €

excl. 19% VAT , plus (Standard)

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

article number: M1057SIWM1

WELDING DEVICE MILANO 2300

The light Milano2300 from Vector Welding is a MIG/MAG welding device with 10-200A in MIG/MAG mode, 10-170A in MMA mode, as well as 10-200A in TIG mode (optional).

The MIG/MAG welding process with its automatic wire feed is suitable for many welding applications, even when working in hard-to-reach areas.

This article is a complete set consisting of MIG/MAG welding device Milano 2300, welding helmet, 5kg wire roll and accessory set.

MILANO 2300 EICHARACTERISTICS & ADVANTAGES:

MIG/MAG: welding with automatic wire feed. In MIG welding argon (more rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as shielding gas and is mainly used for simple and low-alloy steel such as mild steel.
Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range.
In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
inductance: The unit has a continuously adjustable choke. This smoothes the welding current and changes the welding speedand changes the rate of current rise to improve weld seam quality and precision.
2 cycles/4 cycles (MIG/MAG and TIG)
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are the arc carrier and filler metal in one.
Hot start: each time the welder is restarted, overcurrent is provided to assist ignition of the arc.
Arc Force: Melted MaMelted material transfers more easily to the workpiece. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.
DC TIG Welding ( optional: only possible with additional hose package and cables): Welding of almost all metals
Lift Arc: Ignition occurs on contacton contact with the workpiece, then the torch can be lifted and welding process starts with the selected parameters./span>
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
job memory: with the help of memory locations, work sequences can be stored and thus reused at a later time.
overheating protection

MILANO 2300 FEATURES:

MILANO 2300 TECHNICAL DETAILS:

adjustment range welding current ((MIG/MAG mode)	10 - 200 A
Welding current setting range (MMA/STICK mode)	10 - 170 A
Welding current setting range (TIG mode)	10 - 200 A
Duty cycle (ED) MIG/MAG 40°C	200 A at 18V 40%
Duty cycle (ED) MMA/STICK 40°C	170 A at 26.8V 30%
Duration of operation (ED) TIG 40°C	200 A at 18V 40%
Mains voltage	1 x 230 Volt
Mains frequency	50 - 60 Hz
Protection class	IP23
Dimensions in mm (L x W x H)	490 x 225 x 380
Weight in kg	14
Standards	EN60974-1 / IEC60974-1
Wire diameter in mm	0.6/0.8/1

MILANO 2300 CONTROLLER:

1. on/off	4. display display ampere	7. welding mode (MIG/MAG, TIG, MMA)
2. superheat display	5. display volt	8. 2 cycle/ 4 cycle
3. JOB and STORE	6. parameter setting	9. selection wire gauge

:	Performance Series
Shipping weight:	25,87 kg
Item weight:	23,12 kg

MILANO2300 TECHNICAL DETAILS:

Welding current setting range (MIG mode)	30 - 200 A
Welding current setting range (MMA/STICK mode)	10 - 170 A
Welding current setting range (TIG mode)	10 - 200 A
Duty cycle (ED) MIG40°C, 10 min	200 A at 24V 40%
Duty cycle (ED) MMA/STICK40°C, 10 min	170 A at 26.8V 30%
Duty cycle (ED) TIG40°C, 10 min	200 A at 18V 40%
Mains voltage	230V +/- 15%
Mains frequency	50 - 60 Hz
Effective input current	16,8A
Input current (max.)	30,9A
Required design of the single-phase generator	15 kVA
Protection class	IP23
Open circuit voltage (MIG/WIG/MMA)	60V
Wire guide roller	0,6/0,8/1
Material thickness	up to 0.8mm
Gas sequence (seconds)	3
Dimensions in mm (L x W x H)	490 x 225 x 380
Weight in kg	14
Standards	EN60974-1 / IEC60974-1

Milano 2300 welding machine - Powerful MIG/MAG welding machine
Basic automatic welding helmet (black) - For optimum visual and eye protection
Argon/CO₂ shielding gas pressure regulator - Precise gas regulation during welding
MIG MAG welding wire steel SG 3, ER70-6, 0.8 mm on 5 kg wire reel - Ideal for steel joints
MB15 gas nozzle (1 piece) - Suitable for standard MIG/MAG torches
MB15 contact tip size 0.8 (1 piece) - For fine and precise welding work