MIG MAG welder 255A, MMA electrode 170A, IGBT, for 5kg/15kg wire reel | MIG255A

SKU: M2255B
GTIN: 4251210406373
Category: MIG MAG
Brands: VECTOR WELDING

MIG MAG welder 255A, MMA electrode 170A, IGBT, for 5kg/15kg wire reel | MIG255A

VECTOR WELDING MIG/MAG welding device MIG 255A

MIG/MAG 30-255A

2 cycle/ 4 cycle

MMA/electrode 30-170A

IGBT

suitable: wire rolls 5kg (D200) & 15kg (D300) - NOT included in delivery

335,29 €

excl. 19% VAT , plus (Standard)

Manufacturers recommended retail price: 589,00 €

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

pcs.

article number: M2255B

WELDING DEVICE MIG 255A

The MIG 255A from Vector Welding is a MIG/MAG welder with 30-255A in MIG/MAG mode, 30-170A in MMA mode, and 10-200A in TIG mode (optional).

The MIG/MAG welding process with its automatic wire feed is suitable for many welding applications, even when working in hard-to-reach places.

MIG 255A PROPERTIES & ADVANTAGES:

MIG/MAG: Welding with automatic wire feed. In MIG welding Argon (more rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2is based on CO2 or a mixed gas of argon, CO2 and O2 as shielding gas and is mainly used for simple and low-alloy steel such as mild steel.
Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range. .
In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
Inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate of current rise so that the weld seam quality and precision is improved.
2 cycles/4 cycles (MIG/MAG and TIG)
MMA/STICK/E-HAND: coated electrodes are used - bin this process, the electrodes are arc carriers and filler metal in one.
hot start: each time the welding unit is restarted, overcurrent is provided to support the ignition of the arc.
Arc Force: Melted material transfers to the workpiece more easily. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
Anti-stick automatically switches off the welding generatoroff, if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.
DC-WIG welding (optional: only possible with additional hose package and cables): Welding of almost all metals
Lift Arc: Ignition takes place on contact with the workpiece, then the torch can be lifted and welding starts with the selected parameters.
Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
overheating protection

MIG 255A FEATURES:

MIG 255A TECHNICAL DETAILS:

setting range welding current (MIG/MAG mode)	30 - 255 A
setting range welding current (MMA/STICK mode)	30 - 170 A
setting range welding current (TIG mode)	10 -- 200 A
duration of operation (ED) MIG/MAG 40°C	255 A at 25V 35%
duration of operation (ED) MMA/STICK 40°C	170 A at 26.8V 35%
duration of operation (ED) TIG 40°C	200 A at 18V 35%
mains voltage	1 x 230 Volt
mains frequency	50 - 60 Hz
protection class	IP23
Dimensions in mm (L x W x H)	493 x 222 x 375
Weight in kg	11.5
Standards	EN60974-1 / IEC60974-1
wire diameter in mm	0.6/0.8/1

MIG 255A CONTROL PANEL:

1. on/off	4. welding mode	7. 2 cycle/ 4 cycle
2. superheat display	5. display	8. wire thickness selection
3. parameter setting	6. ampere/inductance/burn-back/volt