Item number: T1054VW
AC/DC TIG Welder - London 2400
The AC / DC TIG welder London 2400 from Vector Welding is based on the digital system. It offers a precise, professional AC/DC TIG welding process.
With the London 2400 all weldable metals, including aluminium, can be processed.
The machine works with 200A in TIG mode and 170A in MMA/Electode/Stick mode.Simple operation and full functions: All necessary controls for direct current, alternating current TIG welding with HF ignition or MMA/electode welding with contact ignition can be quickly set via the control panel.
London 2400 FEATURES & ADVANTAGES:
-
AC/DC TIG: welding of
all weldable metals including aluminium
-
The adjustable AC output frequency allows
the operator to focus the arc to minimize the heat affected
zone.
-
The advanced AC balance control helps
to maintain a sharp tungsten needle to precisely control the arc in the
weld joint.
-
Pulse
function: during pulse welding, the welding current
alternates between output and peak current at the desired frequency.
The longer the intervals, the less energy and heat is supplied to the
workpiece
-
Continuous
output control: Focus the arc for different material
thicknesses. Strong for heavy duty: 200A in TIG mode & 170A
in MMA mode.
-
Trigger
Control: 4T/2T
-
MMA/electrodes/stick:
coated electrodes are used - in this process the electrodes are arc
carrier and filler metal in one.
-
Hotstart:every
time the welding unit is restarted, overcurrent is provided and thus
supports the ignition of the arc.
-
Arc-Force: Melted
material is transferred more easily to the workpiece. Prevents the arc
from extinguishing if this material causes contact between electrode
and molten pool.
-
Anti-Stick: automatically
switches off the welding generator if the electrode sticks to the
workpiece and must be removed by hand without damaging the electrode
clamp
-
9
memory locations for individual setting of the
welding parameters.
London 2400 TECHNICAL DETAILS:
Adjustment range welding current (TIG)
|
10 -200 A
|
Adjustment range welding current (MMA/Elektrode)
|
10 -170 A
|
Duty cycle TIG 20°C
|
200 A at 18V 40%
|
Duty cycle MMA 20°C
|
170 A at 26,8V 25%
|
Input Voltage
|
1 x 230 Volt
|
Power frequency
|
50 - 60 Hz
|
Protection class
|
IP23
|
Dimensions in mm (L x W x H)
|
525 x 260 x 445
|
Weight (kg)
|
11
|
Standards
|
EN 60974-1 / IEC 60974-1
|
Cooling
|
Fan cooled
|
Welder type
|
Inverter power source
|
1. Display
|
5. Power on/off
|
9. Setting of welding parameters
|
2. PULS Function
|
6. Overheating indicator
|
10. Hotstart/Arc Force/Anti Stick
|
3. 2T/4T Trigger
|
7. JOB and SAVE
|
11. Setting display
|
4. Welding mode (MMA/TIG)
|
8. AC/DC Mode
|
|
London 2400 SETTING DETAILS:
1. Gasflow
|
6. Pulse width
|
11. AC Frequency (50-200HZ)
|
2. Load power capacity
|
7. Pulse frequency (HZ)
|
12. Electricity shifting (10-50%)
|
3. Electricity increase
|
8. Current reduction
|
REM=Remote/remote control light
|
4. Primary current
|
9. Closing current
|
|
5. Secondary current
|
10. Gas after-run
|
|
London 2400 TECHNICAL DETAILS:
| Welding Current Range (TIG) |
10–200 A |
| Welding current range (MMA/electrode) |
30–170 A |
| Duty Cycle (DC) TIG 40°C, 10 min |
200 A at 18 V, 40% |
| Duty cycle (ED) MMA at 40°C, 10 min |
170 A at 26.8 V, 25% |
| Mains voltage |
230 V ± 15% |
| Mains frequency |
50–60 Hz |
| Effective input current |
15.4 A |
| Input current (max.) |
30.9 A |
| Required rating of the single-phase generator |
10 kVA |
| Protection class |
IP23 |
| No-load voltage |
60 V (DC) |
| Dimensions in mm (L x W x H) |
360 x 160 x 380 |
| Weight in kg |
9.88 |
| Standards |
EN IEC 60974-1:2022/A12:2023
EN IEC 60974-10:2021 (Class A) |
| Cooling |
Fan-cooled |
| Welding Machine Type |
Inverter power source |
London 2400 SCOPE OF DELIVERY:
| London 2400 AC/DC TIG Welder |
| TIG torch: WP-26 with 5-pin connector and gas/power connection (threaded), 3 m |
| TIG set, 10-piece |
| Electrode clamp (9-pin), 2 m |
| Ground clamp with ground cable (9-pin), 2 m |
| Gas connection hose |
| Quick-connect coupling for the gas connection |
Explanation of the display settings:
-Welding current: Setting the desired welding current for precise work in TIG and MMA mode.
-Pulse control: Adjustment of pulse current, pulse width and pulse frequency for optimum welding conditions with sensitive materials.
-AC/DC mode: Switch between direct current (DC) for steel and alternating current (AC) for aluminium.
-AC balance: Control of the cleaning effect and penetration for a clean weld seam on aluminium.
-AC frequency: Optimisation of arc density for more precise weld seams.
-Hotstart: Activates a brief increase in welding current to facilitate ignition.
-Gas pre-flow and gas post-flow: Individual control of the shielding gas flow before and after the welding process to improve welding quality.
-HF ignition: High-frequency ignition for a simple and reliable arc start phase.
-Job memory: Stores up to 9 welding parameters to facilitate repetitive settings for frequent jobs.
The high-resolution digital display enables intuitive operation, with all parameters clearly visible and easy to set. Perfect for beginners and professionals!
There are no reviews yet.
