MIG MAG welder 200A, MMA electrode 170A, IGBT, for 5kg wire reel | Milano 2300

SKU: M1057SWIM
GTIN: 4251210405246
Category: MIG MAG
Brands: VECTOR WELDING

MIG MAG welder 200A, MMA electrode 170A, IGBT, for 5kg wire reel | Milano 2300

VECTOR WELDING MIG/MAG welding device Milano 2300

MIG/MAG 10-200A

2 cycle/4 cycle

MMA/electrode 10-170A

IGBT Inverter

Job memory

suitable: wire roll 5kg (D200) - NOT included in delivery

503,36 €

excl. 19% VAT , plus (Standard)

Manufacturers recommended retail price: 719,00 €

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

pcs.

Article number: M1057SIWM

WELDING DEVICE MILANO 2300

The Milano 2300 from Vector Welding is a MIG/MAG welding machine with 10-200A in MIG/MAG mode, 10-170A in MMA mode, as well as 10-200A in TIG mode (optional).

The MIG/MAG welding process with its automatic wire feed is suitable for many welding applications, even when working in hard-to-reach areas.

MILANO 2300 PROPERTIES & ADVANTAGES:

MIG/MAG: Welding with automatic wire feed. When MIG welding argon (more rarely helium) is used as the shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as the shielding gas and is mainly used for simple and low-alloy steel such as mild steel.
Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range. .
In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
Inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate of current rise to improve the weld seam quality and precision.
2 cycles/4 cycles (MIG/MAG and TIG)
MMA/STICK/E-HAND: coated electrodes are used - in this process, the electrodes are the arc carrier and filler metal in a.
hot start: each time the welding unit is restarted, overcurrent is provided to support the ignition of the arc.
Arc Force: Melted material transfers to the workpiece more easily. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
Anti-Stick automatically switches off the welding generator if the electrode is not in contact with the molten poolElectrode is stuck to the workpiece and must be removed by hand without damaging the electrode clamp.
DC TIG welding ( optional: only possible with additional hose package and cables): Welding of almost all metals
Lift Arc: Ignition occurs on contact with the workpiece, then the torch can be lifted and the welding process starts with the selected parameters.span>
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical SCurrents
Job memory: With the help of memory locations, workflows can be saved and used again at a later time.
overheating protection

MILANO 2300 FEATURES:

MILANO 2300 TECHNICAL DETAILS:

Welding current setting range (MIG/MAG mode) SPL	30 - 200 A
Welding current setting range (MIG/MAG mode) 0.6 wire	25-110 A
Welding current setting range (MIG/MAG mode) 0.8 wire	35-180 A
Welding current setting range (MIG/MAG mode) 1.0 wire	50-200 A
Welding current setting range (MMA/STICK mode)	10 - 170 A
Welding current setting range (TIG mode)	10 - 200 A
Welding current duty cycle (ED) MIG/MAG 40°C	200 A at 18V 40%
Duty cycle (ED) MMA/STICK 40°C	170 A at 26.8V 30%
Duty cycle (ED) TIG 40°C	200 A at 18V 40%
Mains voltage	1 x 230 Volt
Mains frequency	50 - 60 Hz
Protection class	IP23
Dimensions in mm (L x W x H)	490 xx 225 x 380
weight in kg	14
standards	EN60974-1 / IEC60974-1
wire diameter in mm	0.6/0.8/1

MILANO 2300 CONTROL SYSTEM:

1. on/off	4. display Ampere	7. welding mode (MIG/MAG, TIG, MMA)
2. superheat display	5. display Volt	8. 2 cycle/ 4 cycle
3. JOB and SAVE	6. parameter setting	9. selection wire gaugeSelection wire thickness

:	Performance Series
Shipping weight:	17,30 kg
Item weight:	16,00 kg

MILANO 2300 TECHNICAL DETAILS:

Welding current setting range (MIG/MAG mode) SPL	30 - 200 A
Welding current setting range (MIG/MAG mode) 0.6 wire	25-110 A
Welding current setting range (MIG/MAG mode) 0.8 wire	35-180 A
Welding current setting range (MIG/MAG mode) 1.0 wire	50-200 A
Welding current setting range (MMA/STICK mode)	10 - 170 A
Welding current setting range (TIG mode)	10 - 200 A
Welding current duty cycle (ED) MIG/MAG 40°C	200 A at 18V 40%
Duty cycle (ED) MMA/STICK 40°C	170 A at 26.8V 30%
Duty cycle (ED) TIG 40°C	200 A at 18V 40%
Mains voltage	1 x 230 Volt
Mains frequency	50 - 60 Hz
Protection class	IP23
Dimensions in mm (L x W x H)	490 xx 225 x 380
weight in kg	14
standards	EN60974-1 / IEC60974-1
wire diameter in mm	0.6/0.8/1