WELDER SET: 200A DC Tig and Stick Welder with Plasma cutter, aelmet, foot pedal, accessoires | CT520PD

SKU: K2031BSET1
GTIN: 4251210407707
Category: TIG-CUT
Brands: VECTOR WELDING

WELDER SET: 200A DC Tig and Stick Welder with Plasma cutter, aelmet, foot pedal, accessoires | CT520PD

VECTOR WELDING welding machine with plasma cutter CT520 PD

DC TIG 10-200A

HF-ignition

Stick/MMA 10-170A

Plasma Cut 20-40A

IGBT

FULL EQUIPMENT: Welding equipment & plasma cutter with helmet, foot pedal, welding rods & accessories

452,94 €

excl. 19% VAT , plus (Standard)

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Item number: K2031B1

DC TIG WELDER + PLASMA CUTTER SET CT520 PD

The CT520 PD from Vector Welding® is a combination device for welding and plasma cutting.

With 200A in TIG mode, 170A in MMA/electrode mode and plasma cutting with 40 A at 100V the device is well suited for installation, Repair, maintenance and DIY.

The 6,5kg light CT520 PD offers everything you need for metal welding or -cutting work

This article is a FULL EQUIPMENT SET consisting of welding device & plasma cutter CT520PD, welding helmet, foot pedal, welding rods/tungsten electrodes and accessories!

CT520 PD FEATURES & ADVANTAGES:

3in1 multi-device: DC TIG, MMA/STICK, Plasma cut
DC-TIG Welding: Welding of almost all metals (not aluminium)
HF-ignition (TIG/CUT)
MMA/STICK: wrapped electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
Hotstart is provided at each restart of the overcurrent by the welding unit and thus supports the ignition of the arc.
Arc-Force: Melted material goes more easily onto the workpiece. Prevents the The arc is extinguished if this material causes the contact between electrode and molten bath.
Anti-Stick: automatically switches off the welding generator when the electrode threatens to stick to the workpiece. It can be removed by hand, without Electrode clamp closed damage.
Plasma cutter a plasma jet generated by electricity melts the material and removes it with compressed air - a precise cut is created. With this method it is possible to cut all conductive metals (e.g. steel, stainless steel, aluminium, copper, etc.)
cut thickness: max. 12mm (hand guided), quality cut max. 8mm (hand guided)
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching electric currents
Overheating protection

CT520 PD FEATURES:

CT520 PD TECHNICAL DETAILS:

adjustment range welding current (TIG Mode)	10-200 A
adjustment range welding current (STICK Mode)	10 -170 A
adjustment range cutting current (CUT Mode)	20 - 40 A
Duty cycle TIG 40°C	200 A at 18 V 40%
Duty cycle STICK 40°C	170 A at 26.8 V 25%
	40 A at 100 V 40%
Mains voltage	1 x 230 Volt
Mains frequency	50 - 60 Hz
Protection class	IP23S
Dimensions in mm (L x B x H)	425 x 152 x 291
Weight in kg	6,5
Standards	EN60974-1 / EC60974-1
Maximum cutting capacity (hand guided)	12 mm
Quality cutting capacity (hand guided)	8 mm

CT520 PD SYSTEM CONTROL:

1. Display	4. Ampere	7. 2 stroke/ 4 stroke mode
2. Hotstart/Arc Force/ Anti-Stick	5. On/Off	8. Mode (TIG/Stick/CUT)
3. Time (in seconds)	6. Overheatimg Display	9. Parameter settings

1. Gas flow	5. REM=Remote
2. Starting current	6. Current reduction
3. Current rise	7. Final Current
4. welding current	8. Gas follow-up

Shipping weight:	22,85 kg
Item weight:	14,55 kg

CT520PDTECHNICAL DETAILS:

Setting rangeWelding current (TIG)	10 -200 A
Welding current setting range (MMA/electrode)	10 -170 A
Setting range plasma cutter (CUT)	20 - 40A
Duty cycle (ED) TIG, 40°C, 10 min	200 A at 18V 40%
Duty cycle (ED) MMA,40°C, 10 min	170 A at 26.8V 25%
Duty cycle (ED) CUT, 40°C, 10 min	40 A at 100V 40%
Mains voltage	230V +/- 15%
Mains frequency	50 - 60 Hz
Effective input current	15,4A
Input current (max.)	30,9A
Required design of the single-phase generator	10 kVA
Protection class	IP23
Open circuit voltage (TIG/MMA)	60V DC
Open circuit voltage (CUT)	250V DC
Dimensions in mm (L x W x H)	425 x 152 x 291
Weight in kg	6,5
Standards	EN 60974-1 / IEC 60974-1
Cooling	Fan cooled
Welding machine type	Inverter power source