DC TIG welder 200A with plasma cutter 50A, pulse inverter, MMA electrode 170A, HF ignition, IGBT | Berlin 2400

SKU: K1052SWIM
GTIN: 4251210405222
Category: TIG-CUT
Brands: VECTOR WELDING

DC TIG welder 200A with plasma cutter 50A, pulse inverter, MMA electrode 170A, HF ignition, IGBT | Berlin 2400

VECTOR WELDING Welding device with plasma cutter Berlin 2400

DC TIG 10-200A

PULSE Function

HF ignition

MMA/electrode 10-170A

Plasma cutter 50A (contact ignition)

IGBT

job storage

419,33 €

excl. 19% VAT , plus (Standard)

Manufacturers recommended retail price: 689,00 €

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

pcs.

Article number: K1052SWIM

WELDING EQUIPMENT + PLASMA CUTTING BERLIN 2400

The BERLIN 2400 from Vector Welding is a combined device for welding and plasma cutting. With 200A in TIG mode, 170A in MMA mode and plasma cutting with 50 A at 96V, the device is well suited for installation, repair, maintenance and DIY.

The BERLIN 2400 offers everything you need for metal welding or cutting work. Easy to operate and with full functionality: all necessary parameters can be quickly set and saved via the control panel.

BERLIN 2400 PROPERTIES & ADVANTAGES:

3in1 Combi-device: DC TIG, MMA/STICK, plasma cutting
DC TIG welding: welding of almost all metals
HF-ignition (TIG)
pulse function: in pulse welding the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are the arc carrier and filler metal in one.
hot start: each time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc.
Arc Force: Melted material transfers to the workpiece more easily. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.
Plasma cutter: CUT function using a plasma beam generated by electricity. This melts the material and removes it with compressed air - a pre- a precise cut is created. With this process all conductive metals can be cut (e.g. steel, stainless steel, aluminium, copper, etc.)
contact ignition (CUT)
cutting thickness: maximum 12mm (hand-guided), quality cut 8mm (hand-guided)
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
overheating protection
9 memory locations zfor individual setting of the welding parameters.

BERLIN 2400 FEATURES:

Berlin 2400 welding device with plasma cutter Set

BERLIN 2400 TECHNICAL DETAILS:

Welding current setting range (TIG mode)	10-200 A
Welding current setting range (MMA/STICK mode)	10 -170 A
Welding current setting range (CUT mode)	10 - 50 A
Welding current duty cycle (ED) TIG 40°C	200 A at 18 V 4A at 18 V 40%
duration of operation (ED) MMA/STICK 40°C	170 A at 26.8 V 25%
duration of operation (ED) Plasma cutter 40°C	50 A at 96 V 40%
mains voltage	1 x 230 Volt
mains frequency	50 - 60 Hz
protection class	IP23
dimensions in mm (L x W x H)	380 x 160 x 405
Weight in kg	9.5
standards	EN60974-1 / EC60974-1
Maximum cutting capacity (hand-guided)	12 mm
Quality cutting capacity (hand-guided)	8 mm

BERLIN 2400 SYCONTROLLER CONTROL:

1. power display/overheat display	4. PULSE function	7. hotstart/ARC Force/Anti Stick
2. mode: MMA/WIG/Plasma	5. +/- key	8. JOB and SAVE
3. 2 cycle/ 4 cycle	6. display

1. gas flow	5. pulse current	9. final current
2. start current	6. pulse width	10. GaGas lag
3. current rise	7. pulse frequency	REM=Remote/remote control lamp
4. welding current	8. current reduction

:	Performance Series
Shipping weight:	15,40 kg
Item weight:	14,40 kg

BERLIN 2400 TECHNICAL DETAILS:

Welding current setting range (TIG mode)	10-200 A
Welding current setting range (MMA/STICK mode)	10 -170 A
Welding current setting range (CUT mode)	10 - 50 A
Welding current duty cycle (ED) TIG 40°C	200 A at 18 V 4A at 18 V 40%
duration of operation (ED) MMA/STICK 40°C	170 A at 26.8 V 25%
duration of operation (ED) Plasma cutter 40°C	50 A at 96 V 40%
mains voltage	1 x 230 Volt
mains frequency	50 - 60 Hz
protection class	IP23
dimensions in mm (L x W x H)	380 x 160 x 405
Weight in kg	9.5
standards	EN60974-1 / EC60974-1
Maximum cutting capacity (hand-guided)	12 mm
Quality cutting capacity (hand-guided)	8 mm