Item number: T1054VW
AC/DC TIG Welder - London 2400
The AC / DC TIG welder London 2400 from Vector Welding is based on the digital system. It offers a precise, professional AC/DC TIG welding process.
With the London 2400 all weldable metals, including aluminium, can be processed.
The machine works with 200A in TIG mode and 170A in MMA/Electode/Stick mode.Simple operation and full functions: All necessary controls for direct current, alternating current TIG welding with HF ignition or MMA/electode welding with contact ignition can be quickly set via the control panel.
London 2400 FEATURES & ADVANTAGES:
-
AC/DC TIG: welding of all weldable metals including aluminium
-
The adjustable AC output frequency allows the operator to focus the arc to minimize the heat affected zone.
-
The advanced AC balance control helps to maintain a sharp tungsten needle to precisely control the arc in the weld joint.
-
Pulse function: during pulse welding, the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece
-
Continuous output control: Focus the arc for different material thicknesses. Strong for heavy duty: 200A in TIG mode & 170A in MMA mode.
-
Trigger Control: 4T/2T
-
MMA/electrodes/stick: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
-
Hotstart:every time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc.
-
Arc-Force: Melted material is transferred more easily to the workpiece. Prevents the arc from extinguishing if this material causes contact between electrode and molten pool.
-
Anti-Stick: automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp
-
9 memory locations for individual setting of the welding parameters.
London 2400 FEATURES:
London 2400 TECHNICAL DETAILS:
| Adjustment range welding current (TIG) |
10 -200 A |
| Adjustment range welding current (MMA/Elektrode) |
10 -170 A |
| Duty cycle TIG 20°C |
200 A at 18V 40% |
| Duty cycle MMA 20°C |
170 A at 26,8V 25% |
| Input Voltage |
1 x 230 Volt |
| Power frequency |
50 - 60 Hz |
| Protection class |
IP23 |
| Dimensions in mm (L x W x H) |
525 x 260 x 445 |
| Weight (kg) |
11 |
| Standards |
EN 60974-1 / IEC 60974-1 |
| Cooling |
Fan cooled |
| Welder type |
Inverter power source |
| 1. Display |
5. Power on/off |
9. Setting of welding parameters |
| 2. PULS Function |
6. Overheating indicator |
10. Hotstart/Arc Force/Anti Stick |
| 3. 2T/4T Trigger |
7. JOB and SAVE |
11. Setting display |
| 4. Welding mode (MMA/TIG) |
8. AC/DC Mode |
London 2400 SETTING DETAILS:
| 1. Gasflow |
6. Pulse width |
11. AC Frequency (50-200HZ) |
| 2. Load power capacity |
7. Pulse frequency (HZ) |
12. Electricity shifting (10-50%) |
| 3. Electricity increase |
8. Current reduction |
REM=Remote/remote control light |
| 4. Primary current |
9. Closing current |
|
| 5. Secondary current |
10. Gas after-run |
| : | Performance Series |
| Shipping weight: | 13,80 kg |
| Item weight: | 12,70 kg |
London 2400 TECHNICAL DETAILS:
| Welding Current Range (TIG) | 10–200 A |
| Welding current range (MMA/electrode) | 30–170 A |
| Duty Cycle (DC) TIG 40°C, 10 min | 200 A at 18 V, 40% |
| Duty cycle (ED) MMA at 40°C, 10 min | 170 A at 26.8 V, 25% |
| Mains voltage | 230 V ± 15% |
| Mains frequency | 50–60 Hz |
| Effective input current | 15.4 A |
| Input current (max.) | 30.9 A |
| Required rating of the single-phase generator | 10 kVA |
| Protection class | IP23 |
| No-load voltage | 60 V (DC) |
| Dimensions in mm (L x W x H) | 360 x 160 x 380 |
| Weight in kg | 9.88 |
| Standards | EN IEC 60974-1:2022/A12:2023 EN IEC 60974-10:2021 (Class A) |
| Cooling | Fan-cooled |
| Welding Machine Type | Inverter power source |
London 2400 SCOPE OF DELIVERY:
| London 2400 AC/DC TIG Welder |
| TIG torch: WP-26 with 5-pin connector and gas/power connection (threaded), 3 m |
| TIG set, 10-piece |
| Electrode clamp (9-pin), 2 m |
| Ground clamp with ground cable (9-pin), 2 m |
| Gas connection hose |
| Quick-connect coupling for the gas connection |
Explanation of the display settings:
-Welding current: Setting the desired welding current for precise work in TIG and MMA mode.
-Pulse control: Adjustment of pulse current, pulse width and pulse frequency for optimum welding conditions with sensitive materials.
-AC/DC mode: Switch between direct current (DC) for steel and alternating current (AC) for aluminium.
-AC balance: Control of the cleaning effect and penetration for a clean weld seam on aluminium.
-AC frequency: Optimisation of arc density for more precise weld seams.
-Hotstart: Activates a brief increase in welding current to facilitate ignition.
-Gas pre-flow and gas post-flow: Individual control of the shielding gas flow before and after the welding process to improve welding quality.
-HF ignition: High-frequency ignition for a simple and reliable arc start phase.
-Job memory: Stores up to 9 welding parameters to facilitate repetitive settings for frequent jobs.
The high-resolution digital display enables intuitive operation, with all parameters clearly visible and easy to set. Perfect for beginners and professionals!
There are no reviews yet.
