Description
Item number:
C1050VD
PLASMA CUTTER C71
The C71
from Vector Welding is a plasma cutter with
contactless ignition. The device is a strong and reliable
partner in the areas of installation, repair, maintenance and DIY.
The
cutting current is infinitely adjustable from 20-70A. The C71 achieves
a maximum cutting thickness of 30 mm and average
quality cuts up to 20mm.
C71
FEATURES & Benefits:
- Plasma cutter:A plasma beam generated by electricity melts the material and with compressed air - a precise cut is created. With this process, all conductive metals can be cut (e.g. steel, stainless steel, aluminium, copper, etc.)
- Cutting thickness steel: maximum 30mm (hand-guided), quality cut average up to 20mm (hand-guided).
- Cutting thickness aluminum: maximum 20mm (hand guided), quality cut average up to 15mm (hand guided).
- Cutting current infinitely adjustable from 20-70A
- Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching electric currents
- Overheat protection
C71
FEATURES:
C71
TECHNICAL DETAILS:
| Setting range cutting current |
20-70A |
| Switch-on time (ED) Plasma cutter
40°C |
70A at 108V 60% |
| Voltage |
400V/3 Phases |
| Frequency |
50 - 60 Hz |
| Protection |
IP23S |
| Dimensions in mm |
520 x 230 x 380 |
| Weight in kg |
18 |
| Standards |
EN60974-1 / EC60974-1 |
| Maximum cutting capacity
(hand-guided) |
30 mm |
| Quality cutting capacity
(hand-guided) |
20 mm |
C71 Control panel:
| 1. Display |
5. Power |
9. "-" Button |
| 2. On/Off |
6. Grid cut |
10. "+" Button |
| 3. Overheating indicator |
7. Normal cut |
|
| 4. Fault indicator |
8. Selection of cutting function |
|
| Plasma cutting: | CUT with Pilot |
| Shipping weight: | 26,00 kg |
| Item weight: | 21,00 kg |
Technical data
C71 TECHNICAL DETAILS:
| Cutting current setting range |
20-70A |
| Duty cycle (ED) plasma cutter 40°C |
70A at 108V 60% |
| Mains voltage |
400V/3 phases |
| Mains frequency |
50 - 60 Hz |
| Protection class |
IP23S |
| Dimensions in mm |
520 x 230 x 380 |
| Weight in kg |
18 |
| Standards |
EN60974-1 / EC60974-1 |
| Maximum cutting capacity (hand-guided) |
30 mm |
| Quality cutting capacity (hand-guided) |
20 mm |
Scope of delivery
C71 Scope of delivery:
| Plasma cutter C71 |
| Plasma torch: PT 80, Euro central connection, 6m |
| Ground clamp with ground cable (9 spike), 3m |
| Gas connection hose |
| Water separator |
Reviews
There are no reviews yet.
