SG-45 Plasma-Torch 40A Eurocentral Adaptor

SKU: SB2112
GTIN: 4251210404096
Category: Plasma torches
Brands: VECTOR WELDING

SG-45 Plasma-Torch 40A Eurocentral Adaptor

SG-45 Plasma-Torch 40A Eurocentral Adaptor for C41 plasma machine

92,35 €

excl. 19% VAT , plus (Standard)

Low stock level
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

pcs.

Description
Reviews

Non-HF Arc Ignition system

Vtorches with pilot arc cut in without high frequency


Torch off.	By pressing the trigger the torch will be fed by the current thus causing a temporary short circuit betweenelectrode and tip.	The air then pushes up the small piston, thuscreating, between the electrode and the tip, the distance needed to strike the pilot arc.	By positioning the torch on the part to be cut, theplasma arc will strike.

Less electromagnetic disturbance, with consequent absence of problems for any electronic, radio, television, telephone and
computer systems in the vicinity of the cutting positions.
Less electric stress on the torch - and on the respective connecting cables - due to the absence of the high voltage necessary
for striking the arc Greater simplicity in comparison with other torches(without high frequency) on the market, with a consequent
decrease of the risks of jamming in the mechanical pneumatic movement for striking the arc. Subject to wear (electrode, tips,
nozzles, diffusers etc.), thanks to the better cooling of the torch obtained by reducing the insulating thicknesses (without
endangering the safety parameters)

Technical Dat : SG-45

Cooling Metho: Air-Cooled

Rating: 40A

Cutting Thickness: 8-12mm

Duty Cycle: 60%

Gas: Air/N

Gas Pressure : 4.5-5.0 bar 65-75 psi

Gas Flow : 100 l/min 210 scfh

Pilot: Electrode to Tip

Ignition : Back Striking Without HF

Post Flow : 90 sec