Item number:
C1051SIWM
PLASMA
CUTTER PARIS 700
The Paris 700 from Vector Welding is a plasma cutter with contactless high-frequency ignition. The device is a strong and reliable partner in the fields of installation, repair, maintenance and do-it-yourself.
The cutting current is infinitely variable from 20-70A. The Paris 700 achieves a maximum cutting thickness of 24 mm and average quality cuts up to 15mm.
Paris
700 PROPERTIES & ADVANTAGES:
-
plasma cutter: A plasma jet generated by electricity melts the material and removes it with compressed air - a precisewith this process all conductive metals can be cut (e.g. steel, stainless steel, aluminium, copper, etc.)
-
High-frequency ignition, contactless: first-class ignition behaviour without contact to the workpiece
-
cutting thickness steel: maximum 24mm (hand-guided), quality cut on average up to 15mm (hand-guided).
-
cutting thickness aluminium: maximum 17mm (17mm (hand-guided), quality cut on average up to 11mm (hand-guided).
-
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
-
overheating protectionrgb
-
overheating protection
cutting current infinitely
variable from 20-70A
Paris 700 FEATURES:
Paris
700 TECHNICAL DETAILS:
| setting range cutting current |
20-70A |
| switch-on time (ED) plasma cutter
40°C |
70A at 108V 60% |
| mains voltage |
400V/3 phases |
| mains frequency |
50 - 60 Hz |
| protection class |
IP23S |
| dimensions in mm (L x W x H) |
380 x 160 x 365 |
| weight in kg |
12 |
| Standards |
EN60974-1 / EC60974-1 |
| Maximum cutting capacity (manually
guided) |
24 mm |
| Quality cutting capacity (manually
guided) |
15 mm |
Paris 700 CONTROL SYSTEM:
| 1. display display display |
3. superheat display |
| 2. operating display |
4. setting wheel |
| : | Performance Series |
| Shipping weight: | 13,30 kg |
| Item weight: | 12,20 kg |
Paris 700TECHNICAL DETAILS:
| Adjustment rangeCutting current (CUT) | 20 - 70A |
| Cutting current at 40°C, 10min | 70A at 108V 60% 54A at 101.7V 100% |
| Mains voltage | 400V +/- 15% |
| Mains frequency | 50 - 60 Hz |
| Effective input current | 13,8A |
| Input current (max.) | 10A |
| Required design of the generator | 15 kVA |
| Protection class | IP23 |
| Open circuit voltage | 311V DC |
| Quality cuts | 15mm |
| max. cutting capacity | 20mm |
| Dimensions in mm (L x W x H) | 365 x 160 x 380 |
| Weight in kg | 10 |
| Standards | EN60974-1 / IEC60974-1 |
| Cooling | Fan cooling |
Paris 700 Scope of delivery:
| Plasma cutter Paris 700 |
| Plasma torch: AG-60 (gas-threaded power connection M16x1.5, 2-pin), 4m |
| Ground clamp with ground cable (9 spike), 3m |
| Water separator |
| Gas connection hose |
There are no reviews yet.
